|
Rust protection bag CarCoverShield: The corrosin protective bag is made of LDPE special synthetic granules, to which an UV stabilizer is added. It is a foil special make. The application of construction foil or greenhouse film seemed to be rather improper. The standart measures of the car protective envelope amount length 246" width 78", height 67" foil thickness 0,2mm this way very robust. The closeness of the cover was checked in test runs. Variedly strong LDPE foils were used. We could realize thereby that the 200µ foil is most suitable. At the end of the test runs (October 25th, 2002) a car was placed in the 0,2mm thick car protective bag with addition of 6 x 1000g bags water vapor absorptive desiccant granules and a hygrometer. After one week 20% relative air moisture was noted. 9 Months later, thus in June 2003 the air moisture values were still pleasant 24% in the envelope.(granules was not exchange during this period). The amount of the air moisture in the CarCoverShield corrosion protective bag can certainly be adapted to the requirements. A value between 42% and 49% is ideal. With this completing test only the reliability as well as the closeness were checked by means of a bodyshell. You can be sure if over a period of 9 months in central-European climate in an unheated and badly ventilated garage the moisture in the CarCoverShield rust protective bag can be kept so low that this system functions. |